Bolt patterns already drawn
Flight controller stacks at 30.5, 25.5, 20 and 16 mm, motor mounts from 9 to 25 mm in M2 to M4, micro and full-size FPV cameras. Place the pattern on a face and pocket it in one step.
Drone design software · FPV and quadcopter frames
Drone mode adds the parts a frame needs: flight controller, motor and camera bolt patterns, servos, a centre of gravity mark and hover estimates. Then check the arms for stress and the frame for resonance against your motors.
$49.99 once · no subscription · 14-day free trial · Windows & Linux

Flight controller stacks at 30.5, 25.5, 20 and 16 mm, motor mounts from 9 to 25 mm in M2 to M4, micro and full-size FPV cameras. Place the pattern on a face and pocket it in one step.
Fix the centre plate, load each motor mount with its thrust and the stress plot shows where the arm gives up. Try carbon fiber plate, aluminium or a printed nylon arm and compare.
The resonance check finds the frame's first three natural frequencies and sets them against the band your motors sweep, with the lowest mode drawn as a ghost. Stiffen the frame before the gyro hears it.
Add the battery, camera and electronics as point masses, for example battery, 180. The Flight card gives centre of gravity, hover power and current, flight time, thrust to weight and hover throttle as you build.
Yes. Sketch the plate outline, pad it to thickness, place the stack and motor patterns, add standoffs and a camera mount. The frame is parametric, so the wheelbase, arm width and plate thickness can be variables you change later.
Yes, as first sizing. From the masses, motors and battery you enter it estimates hover power and current, flight time, thrust to weight and hover throttle. These are textbook approximations to compare builds, not a replacement for a test flight.
You can export the plates as STEP solids with their part names, which CNC services and CAM programs accept. There is no 2D DXF export yet.
Plane mode adds airfoils, wings, rib sets and the airflow check, and both modes can be used on one project, so a VTOL's wing and its lift motors live in the same model.
Try it on your own parts
Full program for 14 days, no card and no account. After that $49.99 once, with every future version included and a 14-day money-back guarantee.